Vessel
氣動微型磨床(表面磨削/拋光) ? 隨著您的繼續使用,高效率脫穎而出
GT-MG25-12CF GT-MG25-9CF
型號
Model No.
空載轉速(rpm)
No Load Speed
耗氣量(m3/min)
Air Consumption
軟管接頭
Hose Coupling
空氣軟菅內徑
Air Hose Inner Dia.(mm)
總體長度(mm)
Overall Length
框架直徑(mm)
Frame Dia.
重量(g)
Weight
刀尖附件尺寸
Tip Tool attachment size
配件 EDP No.
GT-MG25-12CF 25,000 0.25 Rc 1/4 6.35 181 24.5 315 M7
•Chuck handle •Oil •Rubber holder •PO-ring (#60.100.150.240 3pcs. each #400.600 1pc each) •Lap ring (#600 1pc) •Headcup (#80 1pc)
310776
GT-MG25-9CF 25,000 0.25 Rc 1/4 6.35 173 24.5 310 M7 310775
GT-MG25-12CR 25,000 0.16 Rc 1/4 6.35 160 20.0 200 M7 310762
GT-MG25-9CR 25,000 0.16 Rc 1/4 6.35 143 20.0 200 M7 310761
  • Working air pressure: 0.6MPa
  • Overall length: Accessories and exhaust hose parts not included.
  • Weight: Accessories not included.
  • In the main body, a 1.5m air intake hose, exhaust hose and a hose joint are attached.
  • [OP] Should be replaced at our factory.
光滑表面研磨拋光用頂尖工具, 從制造金屬模塑時去除刀具痕跡,達到鏡面精加工的目的  
No.HC-80 Headcup No.RH-30 Rubber Holder No.PR PO-Ring No.LP Lap Ring
One Point
氣動微型磨床(表面磨削/拋光) ? 隨著您的繼續使用,高效率脫穎而出
GT-MG25-12CF
GT-MG25-9CF
型號
Model No.
空載轉速(rpm)
No Load Speed
耗氣量(m3/min)
Air Consumption
軟管接頭
Hose Coupling
空氣軟菅內徑
Air Hose Inner Dia.(mm)
總體長度(mm)
Overall Length
框架直徑(mm)
Frame Dia.
重量(g)
Weight
刀尖附件尺寸
Tip Tool attachment size
配件 EDP No.
GT-MG25-12CF 25,000 0.25 Rc 1/4 6.35 181 24.5 315 M7
•Chuck handle •Oil •Rubber holder •PO-ring (#60.100.150.240 3pcs. each #400.600 1pc each) •Lap ring (#600 1pc) •Headcup (#80 1pc)
310776
GT-MG25-9CF 25,000 0.25 Rc 1/4 6.35 173 24.5 310 M7 310775
GT-MG25-12CR 25,000 0.16 Rc 1/4 6.35 160 20.0 200 M7 310762
GT-MG25-9CR 25,000 0.16 Rc 1/4 6.35 143 20.0 200 M7 310761
  • Working air pressure: 0.6MPa
  • Overall length: Accessories and exhaust hose parts not included.
  • Weight: Accessories not included.
  • In the main body, a 1.5m air intake hose, exhaust hose and a hose joint are attached.
  • [OP] Should be replaced at our factory.
光滑表面研磨拋光用頂尖工具, 從制造金屬模塑時去除刀具痕跡,達到鏡面精加工的目的
No.HC-80 Headcup
No.RH-30 Rubber Holder
No.PR PO-Ring
No.LP Lap Ring
One Point

?